Description
Calibrator and multimeter in a single device / internal memory / Dual mode for simultaneous measurement and calibration / ramp function and interval function / generator for current, voltage, power, resistance sensors and thermocouples
The METRAHIT MULTICAL calibrator and multimeter combines a generator with a signal meter. The combination of these two functions allows process engineers to use the calibrator and multimeter in a highly versatile way. With the Dual function activated, the calibrator multimeter can simulate a measurement value and at the same time measure a current or voltage signal. The METRAHIT MULTICAL calibrator and multimeter enables measurements to be displayed as absolute values or as percentages (in steps). In addition to current, voltage and resistance measurements, the calibrator and multimeter can also display temperature and frequency. The ramp function provides continuous output of calibration values defined by the set maximum and minimum values. The calibrator and multimeter also determines voltage, flow, resistance, capacitance, frequency and temperature. It includes a DKD calibration certificate, which increases the reliability of this calibrator and multimeter.
- Measurement and display of several quantities
- The Dual function allows simultaneous measurement and calibration
- Display of absolute values or percentages
- Frequency and pulse generator
- Ramp function and interval function
- Current simulator (0...24 mA source)
- DKD calibration certificate included
- Robust housing
- Practical real measurement value up to 1 kHz
The METRAHIT MULTICAL calibrator and multimeter combines a generator with a signal meter. The combination of these two functions allows process engineers to use the calibrator and multimeter in a highly versatile way. With the Dual function activated, the calibrator multimeter can simulate a measurement value and at the same time measure a current or voltage signal. The METRAHIT MULTICAL calibrator and multimeter enables measurements to be displayed as absolute values or as percentages (in steps). In addition to current, voltage and resistance measurements, the calibrator and multimeter can also display temperature and frequency. The ramp function provides continuous output of calibration values defined by the set maximum and minimum values. The calibrator and multimeter also determines voltage, flow, resistance, capacitance, frequency and temperature. It includes a DKD calibration certificate, which increases the reliability of this calibrator and multimeter.
- Measurement and display of several quantities
- The Dual function allows simultaneous measurement and calibration
- Display of absolute values or percentages
- Frequency and pulse generator
- Ramp function and interval function
- Current simulator (0...24 mA source)
- DKD calibration certificate included
- Robust housing
- Practical real measurement value up to 1 kHz
Technical specifications
| Category | Detection, Measurement |
|---|---|
| Subcategory | Electrical Measurement |
