http://www.optibelt.com/en/material-handling.html
Service case BASIC for welding optibelt RR, RR Plus and KK
This five-piece service case BASIC provides the user with a complete set of standard equipment for occasional use. The SG02 welding tool has a longer warm-up phase than the premium model and is suitable only for urethane belts that can be welded using the two corresponding guiding clamps as required.
The FZ01 guiding clamps are used for round belts with a diameter of up to 10 mm and for V-belts with profiles of up to 10, whereas the FZ02/3 model is used for round belts from 8 mm upwards in diameter and V-belts up to profile 32.
To ensure the perfect cut for optimum welding results, the set also includes a pair of shears as well as a side cutter for removing the weld seam.
Contents of the service box
GUIDING CLAMPS FZ02/3
for round belts with diameters from 8 mm and V-belt profiles up to 32 (D)
SHEARS AS02
for cutting round belts and V-belts
GUIDING CLAMPS FZ01
for round belts with diameters of up to 10 mm and V-belt profiles up to 10 (Z)
WELDING TOOL SG02
for PU 290-300 °C; power supply: 230 V
SIDE CUTTER SE02
for removing the weld seam
