Description
For straight and mitre cuts up to the right at 45° (even 60°, but only in semi-automatic cycle).
Straight cut: Ø 250 mm - 310 x 230 mm - 310 x 230 mm - 240 x 240 mm.
Machine fully enclosed, mounted on a welded steel frame, with coolant tank and pump.
This machine is equipped with:
400 V three-phase motor, non-switchable, power 1.1 / 1.5 kW.
2 cutting speeds from 40 / 80 m/min.
Cast iron saw frame.
Hydraulic cylinder ensuring the lowering and raising of the saw arm.
Cutting force sensor on the back of the blade.
Hydraulic unit.
Hydraulic bar clamp vice.
Ball-screw bar feeder and motor with hydraulically clamped vice.
Blade rotation stop device at the end of the bar or when the bar is not clamped.
Bar feeder length 600 mm, maximum cutting length 9999,9 mm.
Piece counter up to 9999.
CNC control panel allowing programming of different lengths from the same bar. Each cutting length is linked to a number of pieces. Number of programs 20.
Working height 755 mm.
Cutting capacities:
Straight cut: Ø 250 mm - 310 x 230 mm - 310 x 230 mm - 240 x 240 mm.
Mitre cut 45° right: Ø 210 mm - 220 x 100 mm - 190 x 230 mm - 190 x 190 mm.
Mitre cut 30° right: Ø 130 mm - 130 x 90 mm - 130 x 90 mm - 100 x 100 mm.
Dimensions (L x W x H): 1760 x 1724 x 1600 mm.
Straight cut: Ø 250 mm - 310 x 230 mm - 310 x 230 mm - 240 x 240 mm.
Machine fully enclosed, mounted on a welded steel frame, with coolant tank and pump.
This machine is equipped with:
400 V three-phase motor, non-switchable, power 1.1 / 1.5 kW.
2 cutting speeds from 40 / 80 m/min.
Cast iron saw frame.
Hydraulic cylinder ensuring the lowering and raising of the saw arm.
Cutting force sensor on the back of the blade.
Hydraulic unit.
Hydraulic bar clamp vice.
Ball-screw bar feeder and motor with hydraulically clamped vice.
Blade rotation stop device at the end of the bar or when the bar is not clamped.
Bar feeder length 600 mm, maximum cutting length 9999,9 mm.
Piece counter up to 9999.
CNC control panel allowing programming of different lengths from the same bar. Each cutting length is linked to a number of pieces. Number of programs 20.
Working height 755 mm.
Cutting capacities:
Straight cut: Ø 250 mm - 310 x 230 mm - 310 x 230 mm - 240 x 240 mm.
Mitre cut 45° right: Ø 210 mm - 220 x 100 mm - 190 x 230 mm - 190 x 190 mm.
Mitre cut 30° right: Ø 130 mm - 130 x 90 mm - 130 x 90 mm - 100 x 100 mm.
Dimensions (L x W x H): 1760 x 1724 x 1600 mm.
Technical specifications
| Category | Production machines |
|---|---|
| Subcategory | Cutting machines |
