Automatic vertical bandsaw - WS 370 ANC

For straight and mitre cuts at 45° (left and right) and up to 60° to the right.

Designed for use with one-piece HSS hole saws of Ø 370 mm.

Straight cut: Ø 120 mm - 180 x 100 mm - 100 x 100 mm.

With vertical descent on guide rails.

For straight and mitre cuts + 45° to - 60° by manual pivoting of the sawing head.

Designed for use with one-piece HSS hole saws of Ø 370 mm.

This machine, mounted on a fixed frame, is equipped with:

400 V three-phase motor, not convertible to 230 V three-phase.

Power 1.5 / 2.2 kW giving 2 spindle speeds of 15 / 30 rpm.

Hydropneumatic feed of the sawing head.

Rapid approach of the saw blade at the start of the cut.

Automatic stop at the end of bars or when the set number of cuts is reached.

Saw blade rotation reverser.

Pneumatic horizontal vice.

Floating bar-feed vice.

Bar-feed stroke of 500 mm (in 1 stroke) up to 3000 mm (by stroke doubling).

Vertical clamping device.

Horizontal rollers on the bar-feed vice.

Electrical cabinet.

Control panel allowing operation in "AUTOMATIC" mode and control of each function in "MANUAL" mode.

Programming of different cut lengths on the same bar.

Cut counter.

Chip brush.

Washing gun.

Lubrication system, with chip tray, built into the frame.

Maximum cutting capacities:

Straight cut: Ø 120 mm - 180 x 100 mm - 100 x 100 mm.

Mitre cut 45° to the right: Ø 120 mm - 130 x 100 mm - 100 x 100 mm.

Mitre cut 45° to the left: Ø 105 mm - 130 x 100 mm - 100 x 100 mm.

Mitre cut 60° to the right: Ø 110 mm - 90 x 100 mm - 90 x 90 mm.