Accouplement monobloc, sans jeu, sans torsion, flexible et sans entretien pour la transmission des mouvements de rotation synchronisés avec un angle. La structure fendue innovante permet d'obtenir une flexibilité axiale, radiale et angulaire parfaite pour les petites forces de rappel. Adapté surtout pour les servomoteurs.
Material:
Aluminium.
Version:
Bright.
Temperature range:
-50 °C to +150 °C.
Assembly:
Recommended shaft tolerances h7.
On request:
Hub bores D1 and D2 with separate tolerance class or range.
Note:
Procedure for enlarging pre-drilled bores D1/D2:
Drill the bore out using a small as possible drill or milling cutter. Use a single point tool to turn or bore the hole out to its finished size. Ensure that the coupling is securely held during the machining process and that the drill feed is not too high. The cut depth should not exceed 0.5 mm and the feed for the single point tool should also be not too high.