Editorial team · Environment, Health, Safety
InfoWeb Marketplace · Editorial team
Published on 2 November 2010 · 1 min read
JPM SAS - PUSH BAR ALARM
InfoWeb Marketplace · Editorial teamPublished on 2 November 2010 · 1 min read
Innovative / new dimension
THE FIRST PANIC EXIT DEVICE WITH BUILT-IN STAND-ALONE ALARM. For the safety of people and the security of property against fraudulent exits. PBA makes it possible to equip emergency exits in premises where an access control and monitoring system is not possible or justified: simple to install, simple to use and simple to maintain. Every fraudulent exit or use of the emergency exit triggers the audible (90DB) and visual alarm.
New advantages, improvements and benefits
No connection or wiring. Can be fitted to all types of emergency exit doors that are not connected (to a monitoring control room or fire detection system). PBA is ideal for all small and medium-sized premises highly exposed to theft: commercial premises, retail outlets, restaurants, convenience stores. It allows premises with a small floor area to be equipped with a stand-alone device, without major work on the building or on the emergency exit door, and helps prevent fraudulent exits or theft.
Technical characteristics
. CE panic exit device EN1125 : 2008 NF certified Fire-rated for 2 hours Easy installation
. Hands-free For doors up to 2300 mm in height as standard Corrosion resistance of 90 hours salt spray Stand-alone alarm powered by battery ( 9V - supplied) Switching between active and inactive mode by European profile cylinder (not supplied) Available in versions: 1 side point 2 top and bottom points 3 top, bottom and side points.
Compatibility with solutions already on the market
All PUSH BAR 90+ panic exit device solutions in the JPM range Same fixing holes EN 3000 - outside operating sets.
Associated services
Same as JPM series panic exit devices
Standards
EVACUATION EN 1125 : 2008 NF certification - right to use the NF mark Certification standard for emergency exit equipment products.
Labels and certifications
CE EN1125 : 2008 Fire rating 2 hours NF
THE FIRST PANIC EXIT DEVICE WITH BUILT-IN STAND-ALONE ALARM. For the safety of people and the security of property against fraudulent exits. PBA makes it possible to equip emergency exits in premises where an access control and monitoring system is not possible or justified: simple to install, simple to use and simple to maintain. Every fraudulent exit or use of the emergency exit triggers the audible (90DB) and visual alarm.
New advantages, improvements and benefits
No connection or wiring. Can be fitted to all types of emergency exit doors that are not connected (to a monitoring control room or fire detection system). PBA is ideal for all small and medium-sized premises highly exposed to theft: commercial premises, retail outlets, restaurants, convenience stores. It allows premises with a small floor area to be equipped with a stand-alone device, without major work on the building or on the emergency exit door, and helps prevent fraudulent exits or theft.
Technical characteristics
. CE panic exit device EN1125 : 2008 NF certified Fire-rated for 2 hours Easy installation
. Hands-free For doors up to 2300 mm in height as standard Corrosion resistance of 90 hours salt spray Stand-alone alarm powered by battery ( 9V - supplied) Switching between active and inactive mode by European profile cylinder (not supplied) Available in versions: 1 side point 2 top and bottom points 3 top, bottom and side points.
Compatibility with solutions already on the market
All PUSH BAR 90+ panic exit device solutions in the JPM range Same fixing holes EN 3000 - outside operating sets.
Associated services
Same as JPM series panic exit devices
Standards
EVACUATION EN 1125 : 2008 NF certification - right to use the NF mark Certification standard for emergency exit equipment products.
Labels and certifications
CE EN1125 : 2008 Fire rating 2 hours NF
Advertisement