Editorial team · Environment, Health, Safety
InfoWeb Marketplace · Editorial team
Published on 24 June 2011 · 1 min read
Panic exit devices from Ingersoll Rand Productivity Solutions
InfoWeb Marketplace · Editorial teamPublished on 24 June 2011 · 1 min read
This new range of panic exit devices is 50% faster to install, modular and particularly durable. It is designed for high-traffic locations where safety must be ensured by protection systems.
The installation time of these panic exit devices is reduced by nearly 50% compared with previous models with standard rod linkage, thanks to a new patented ultra-fast mounting concept. It is based on a quick-fix system for attaching the secondary cases to support plates, and above all on a flexible connecting cable between the mechanism and the secondary cases, replacing conventional rigid rods.
This cable provides permanent ease of adjustment. All mounting operations can therefore be carried out in an ergonomic position since, once the mechanisms are fixed, the installer can make the adjustments while standing. Furthermore, the bar, the cable covers and the cable are cut to length without having to take any measurements. The bar can be mounted after the mechanisms have been fixed, and the covers are quickly fixed without using screws.
The new range of panic exit devices has been designed to be modular and to offer more possibilities with fewer references, for greater simplicity. Several device models can be combined with a cabling kit stored in a separate carton, depending on the number of locking points on the door. Two new products are offered to replace the Sécuristyle and Touch Bar ranges: Sécuristyle Évolution and Touch Bar Évolution.
The devices are all sturdy and solid. They have been tested in the most demanding configurations (multi-point, 1200 mm bar) on 200 and 400 kg doors for a total of 400 000 cycles! They offer high corrosion resistance (salt spray test: 240 hours) and are NF and EN 1125:2008 certified. They bear the NF and CE marking and are 1-hour fire-rated (certificates being printed).
Their design is modern, robust and attractive, and they are available in 4 colors (silver, black, white and white/green) with a modern finish; 20% fewer parts.
The installation time of these panic exit devices is reduced by nearly 50% compared with previous models with standard rod linkage, thanks to a new patented ultra-fast mounting concept. It is based on a quick-fix system for attaching the secondary cases to support plates, and above all on a flexible connecting cable between the mechanism and the secondary cases, replacing conventional rigid rods.
This cable provides permanent ease of adjustment. All mounting operations can therefore be carried out in an ergonomic position since, once the mechanisms are fixed, the installer can make the adjustments while standing. Furthermore, the bar, the cable covers and the cable are cut to length without having to take any measurements. The bar can be mounted after the mechanisms have been fixed, and the covers are quickly fixed without using screws.
The new range of panic exit devices has been designed to be modular and to offer more possibilities with fewer references, for greater simplicity. Several device models can be combined with a cabling kit stored in a separate carton, depending on the number of locking points on the door. Two new products are offered to replace the Sécuristyle and Touch Bar ranges: Sécuristyle Évolution and Touch Bar Évolution.
The devices are all sturdy and solid. They have been tested in the most demanding configurations (multi-point, 1200 mm bar) on 200 and 400 kg doors for a total of 400 000 cycles! They offer high corrosion resistance (salt spray test: 240 hours) and are NF and EN 1125:2008 certified. They bear the NF and CE marking and are 1-hour fire-rated (certificates being printed).
Their design is modern, robust and attractive, and they are available in 4 colors (silver, black, white and white/green) with a modern finish; 20% fewer parts.
Advertisement