Status sensors, stainless steel with bracket for toggle clamps

norelem

Status sensors, stainless steel with bracket for toggle clamps
Description :

Status sensors with brackets are used to monitor the actuated status of toggle clamps.

The sensor detects whether the toggle clamp is open or closed and enables this status information to be processed electronically.

The sensor is attached to the toggle clamp via the bracket.

Characteristic(s)

Material:
Stainless steel

Version:
Bright.

Note:
The status sensor and brackets are supplied unassembled.

Technical data:
Inductive sensor:
Output circuit: PNP NO
Operating voltage: 10 - 30 V DC
Operating current: 100 mA
Contact gap: 0.8 mm
Switch frequency: 5000 Hz
Short-circuit proof: yes

Reverse polarity protection: yes
Rating: IP 67
Connection type: 0.3 m cable, PUR with plug
Temperature range: -25 °C - +70 °C
Approvals: CE, c UL us, EAC

Assembly:
The status sensor is fastened to the bracket with the nuts and set to dimension L1.
The bracket is attached with the toggle clamp screws through holes between the foot and the mounting surface.
The switch point fine-tuning is carried out once the toggle clamp is mounted.
The detailed procedure is described in the assembly instructions.

Accessory:
05900
05908
10451
80140

Safety:
Status sensors are not suitable for protecting people.

Searches related toActuators, Positioning System

Grouped quotes (0)