Description
Swing clamps are designed for clamping fixtures where the clamping points must be clear during workpiece removal or placement. These swing clamps operate as single-acting or double-acting traction cylinders. There is a choice of three housing types for the swing clamps as well as various actuation methods. The clamping movement is initiated by a combined swivel and stroke motion. The actual clamping travel then occurs with a linear movement. A wide range of variants with a left or right swivel angle of 90° are available. The swing clamps are very durable because they have a metal wiper which protects against swarf. In addition, an overload protection protects the swing mechanism from damage if the swing process is blocked.
Technical specifications
Material:
Body and piston in steel.
Seal in NBR.
Finish:
Body burnished.
Piston hardened.
Note:
If the permissible volume flow rate of the swivel clamping cylinder is exceeded, a flow restrictor must be fitted upstream.
The permissible operating pressure of the swivel clamping cylinders depends on the length of the clamping arms.
When mounting the clamping arms, they must be supported so as not to damage the ball guide of the swivel clamping cylinders.
Depending on the ventilation connection, the sintered filter of single-acting swivel clamping cylinders must be replaced with a threaded plug.
The clamping arm for swivel clamping cylinder is not included.
Observe the safety instructions.
Operating instructions:
- Threaded connection
- Flange connection with O-ring.
- Drilled channels.
Technical data:
Max. operating pressure: 500 bar.
Mounting:
See mounting contour.
Advantages:
- Integrated metal wiper.
- Integrated overload protection.
- Collision-free access to the workpiece.
- Numerous versions.
- Pressure supply via different connection options.
| Brand | norelem |
|---|---|
| Category | Power transmission, Mechanical components |
| Subcategory | Actuators, Positioning System |


































