Intended for handling loads of 100 to 2500 kg, this electric chain hoist offers the user greater productivity, longer service life and greater flexibility of use.
This system of variation without thresholds on the movements of lifting makes it possible to guarantee an extremely precise positioning of the loads and more flexibility of use.
Depending on the value of the load, the type of movement and its own experience, the user can adjust the speed of movement at will. Lifting is safer and more precise. With a minimum speed close to 0.25 m / min (depending on the version), VARIO allows less experienced operators to handle loads without risk of damage. Continuous speed control also offers greater productivity.
The VARIO speed variation system, called ESR (Extendend Speed ??Range) allows a maximum speed of 1.5 times higher than the standard speed, as well as an adaptation of the deceleration ramp and thus offers a lifting speed Up to 2 times faster with light loads.
The full speed can be used up to 40% of rated load, with the maximum motor speed remaining at 3000 rpm. At 20% of the load, the nominal speed is equal to 150% of the catalog speed. At nominal load, the nominal speed is equal to the catalog speed.
With the VARIO electric hoist, the service life of the equipment is increased. Continuous speed control reduces mechanical shock due to soft start and soft stop.
Reducing the number and level of shocks to the components of the bridge or structure increases the durability of the framing.
Continuous speed control also makes it possible to use the electric brake as a priority during decelerations before applying the mechanical brake.
Electric braking reduces brake wear, as the mechanical brake is used only as a holding brake (parking brake).
VARIO has an adjustable acceleration / deceleration ramp duration, a supervised brake control, a slip control with a torque limiter and an overload prevention by electronic load sensor.
As standard VARIO is also equipped with a load shock regulator, an hour meter and a start counter, as well as a 50% active damping system against the polygon effect.
This system of variation without thresholds on the movements of lifting makes it possible to guarantee an extremely precise positioning of the loads and more flexibility of use.
Depending on the value of the load, the type of movement and its own experience, the user can adjust the speed of movement at will. Lifting is safer and more precise. With a minimum speed close to 0.25 m / min (depending on the version), VARIO allows less experienced operators to handle loads without risk of damage. Continuous speed control also offers greater productivity.
The VARIO speed variation system, called ESR (Extendend Speed ??Range) allows a maximum speed of 1.5 times higher than the standard speed, as well as an adaptation of the deceleration ramp and thus offers a lifting speed Up to 2 times faster with light loads.
The full speed can be used up to 40% of rated load, with the maximum motor speed remaining at 3000 rpm. At 20% of the load, the nominal speed is equal to 150% of the catalog speed. At nominal load, the nominal speed is equal to the catalog speed.
With the VARIO electric hoist, the service life of the equipment is increased. Continuous speed control reduces mechanical shock due to soft start and soft stop.
Reducing the number and level of shocks to the components of the bridge or structure increases the durability of the framing.
Continuous speed control also makes it possible to use the electric brake as a priority during decelerations before applying the mechanical brake.
Electric braking reduces brake wear, as the mechanical brake is used only as a holding brake (parking brake).
VARIO has an adjustable acceleration / deceleration ramp duration, a supervised brake control, a slip control with a torque limiter and an overload prevention by electronic load sensor.
As standard VARIO is also equipped with a load shock regulator, an hour meter and a start counter, as well as a 50% active damping system against the polygon effect.