Note
1. First, place the workpiece on the workpiece support or the clamping screw of the pull clamp. This will compress the internal spring and retract the clamping screw into the main body.
2. Position the tapped hole in the workpiece above the clamping screw.
The tip of the clamping screw is pressed lightly into the tapped hole by the spring pressure.
3. When the drive element is actuated, the clamping screw rotates into the tapped hole of the workpiece and clamps it.
Advantages
Automation capable
High clamping forces
Rapid clamping
Integrated clamping screw
Characteristic(s)
Material
Carbon steel.
Version
Body black oxidised.
Workpiece support tempered (HRC 39-45) and ground
Clamping screw hardened and black oxidised.