This new wireless gas detection beacon allows automatic zone monitoring where hazardous gases can be expected, thanks to the unique combination of an individual gas detector with an alarm amplifier .
The warning system is very simple and clearly identifiable remotely by the operators. So even remotely, the LED green LED ring indicates that the air is free of toxic and combustible gases. If hazardous gases are detected, the color of the LED changes from green to red, providing a clear visual alarm that prevents the presence of the gases in question. In addition, an evacuation sound alarm is emitted at a high volume. The gas inlet on the Dräger X-zone 5500 is designed to allow gas diffusion in the Dräger X-am 5000, 5100 or 5600 on either side
Up to 25 Dräger X-zones 5500 can be automatically interconnected to form a wireless detection barrier. This interconnection of the zone monitoring devices makes it possible to quickly secure large areas. In the event of a gas alarm, a Dräger X-zone 5500 transmits the alarm signal to all interconnected units. The main blinking red alarm in the "mother" unit, which detects gases, differs from the blinking green / red alarms of the connected "daughter" units, Alarm and position of danger.
With the corresponding configuration it is possible to display the maximum concentration of gas measured throughout the monitored zone. Combined with the display of the identifier of the X-zone concerned, it is thus possible to locate the danger zone clearly and quickly.
The warning system is very simple and clearly identifiable remotely by the operators. So even remotely, the LED green LED ring indicates that the air is free of toxic and combustible gases. If hazardous gases are detected, the color of the LED changes from green to red, providing a clear visual alarm that prevents the presence of the gases in question. In addition, an evacuation sound alarm is emitted at a high volume. The gas inlet on the Dräger X-zone 5500 is designed to allow gas diffusion in the Dräger X-am 5000, 5100 or 5600 on either side
Up to 25 Dräger X-zones 5500 can be automatically interconnected to form a wireless detection barrier. This interconnection of the zone monitoring devices makes it possible to quickly secure large areas. In the event of a gas alarm, a Dräger X-zone 5500 transmits the alarm signal to all interconnected units. The main blinking red alarm in the "mother" unit, which detects gases, differs from the blinking green / red alarms of the connected "daughter" units, Alarm and position of danger.
With the corresponding configuration it is possible to display the maximum concentration of gas measured throughout the monitored zone. Combined with the display of the identifier of the X-zone concerned, it is thus possible to locate the danger zone clearly and quickly.