This new range of LEDs and pushbuttons, particularly robust, has been designed to improve the design of control panels and simplify their design
The range includes 22 mm diameter protruding indicator lights and illuminated and non-illuminated pushbuttons with different flanges in black plastic, matt or glossy metal, as well as a flat pushbutton with a diameter of 30 mm With a matte metal flange. A modular design and color choice of red, orange, yellow, green, white or blue LEDs can be used as push buttons, indicator lights or indicator lights.
The pushbuttons install quickly and efficiently by inserting the self-holding actuator into a single hole in the panel, and the contact block holder then snaps onto it. The support, equipped with an anti-rotation protection, can receive stackable contact blocks which simplify the wiring. These contact blocks offer a wide range of configurations, normally open or normally closed, with screw, spring or solder connections.
By offering high reliability, even at low voltages and low currents such as 6V / 1mA, SIRIUS ACT switches are also comfortable in electronic systems and conventional controls. The communication options allow direct connection to a controller via an ASI bus, an IO link or a PROFINET interface, reducing the time and complexity of cabling and facilitating future modifications. The contact blocks and LED modules are specified independently and have all the marking according to EN 50013 for low voltage equipment.
The extreme robustness of the new SIRIUS ACT range is also one of its main strengths. It offers a lifetime of 100,000 hours for LEDs and a mechanical life of 10 million switch maneuvers. It is also characterized by a high degree of protection IP69K which allows its use in equipment subjected to high-pressure water jets, or exposed to oils, caustic solutions or a large amount of dust.
The range includes 22 mm diameter protruding indicator lights and illuminated and non-illuminated pushbuttons with different flanges in black plastic, matt or glossy metal, as well as a flat pushbutton with a diameter of 30 mm With a matte metal flange. A modular design and color choice of red, orange, yellow, green, white or blue LEDs can be used as push buttons, indicator lights or indicator lights.
The pushbuttons install quickly and efficiently by inserting the self-holding actuator into a single hole in the panel, and the contact block holder then snaps onto it. The support, equipped with an anti-rotation protection, can receive stackable contact blocks which simplify the wiring. These contact blocks offer a wide range of configurations, normally open or normally closed, with screw, spring or solder connections.
By offering high reliability, even at low voltages and low currents such as 6V / 1mA, SIRIUS ACT switches are also comfortable in electronic systems and conventional controls. The communication options allow direct connection to a controller via an ASI bus, an IO link or a PROFINET interface, reducing the time and complexity of cabling and facilitating future modifications. The contact blocks and LED modules are specified independently and have all the marking according to EN 50013 for low voltage equipment.
The extreme robustness of the new SIRIUS ACT range is also one of its main strengths. It offers a lifetime of 100,000 hours for LEDs and a mechanical life of 10 million switch maneuvers. It is also characterized by a high degree of protection IP69K which allows its use in equipment subjected to high-pressure water jets, or exposed to oils, caustic solutions or a large amount of dust.