A new range that is characterized in particular by its energy savings and reduced operating costs, reduced noise level, reduced footprint and ATEX certification.
AERZEN, the only manufacturer in the world market that has designed and developed 2 different rotor profiles, offers its customers the following choice: VM compressor for differential pressure up to 3.5 bar or VML compressor up to 2 bar , The objective being to propose the most appropriate machine, the most accurately dimensioned to optimize energy consumption.
And thanks to the combination of several factors like the profile of the rotors, the ratio of multiplication, the internal compression ratio ..., never use and production did not find finer suitability. It is thus possible to obtain an energy gain of more than 20% compared to other models of compressors on the market! A high efficiency EFF1 drive motor alone saves up to 3% of the energy bill!
Compared to the previous generation, the sound pressure level of the new DELTA SCREW Generation 5 range has been reduced by an average of 6 dB (A). Thus, now the expensive reinforced soundproofing hoods can be avoided.
Not only has AERZEN's R & D managed to reduce the congestion of the DELTA SCREW Generation 5, but it has also enabled its installation "side by side", that is to say that in the case where several machines coexist, they can Be arranged side by side.
As for the maintenance, since all the components are accessible from the front face of the machine, the operator realizes it with greater ease. DELTA SCREW Generation 5 also has a new lubrication system to control the oil level even during operation!
The DELTA SCREW Generation 5 range is adapted to the requirements of ATEX zones dust or gas categories 2 and 3.
Some additional data:
• Suction rate: from 270 to 2 600 m3 / hour
• In vacuum: up to 70% vacuum (0.3 bar abs.)
• Automatic belt tension (toggle plate)
• Mechanical ventilation (no additional energy consumption or electrical installation)
• RS485 interface for remote data transmission
• No absorbent material (compliance with agri-food standards).
AERZEN, the only manufacturer in the world market that has designed and developed 2 different rotor profiles, offers its customers the following choice: VM compressor for differential pressure up to 3.5 bar or VML compressor up to 2 bar , The objective being to propose the most appropriate machine, the most accurately dimensioned to optimize energy consumption.
And thanks to the combination of several factors like the profile of the rotors, the ratio of multiplication, the internal compression ratio ..., never use and production did not find finer suitability. It is thus possible to obtain an energy gain of more than 20% compared to other models of compressors on the market! A high efficiency EFF1 drive motor alone saves up to 3% of the energy bill!
Compared to the previous generation, the sound pressure level of the new DELTA SCREW Generation 5 range has been reduced by an average of 6 dB (A). Thus, now the expensive reinforced soundproofing hoods can be avoided.
Not only has AERZEN's R & D managed to reduce the congestion of the DELTA SCREW Generation 5, but it has also enabled its installation "side by side", that is to say that in the case where several machines coexist, they can Be arranged side by side.
As for the maintenance, since all the components are accessible from the front face of the machine, the operator realizes it with greater ease. DELTA SCREW Generation 5 also has a new lubrication system to control the oil level even during operation!
The DELTA SCREW Generation 5 range is adapted to the requirements of ATEX zones dust or gas categories 2 and 3.
Some additional data:
• Suction rate: from 270 to 2 600 m3 / hour
• In vacuum: up to 70% vacuum (0.3 bar abs.)
• Automatic belt tension (toggle plate)
• Mechanical ventilation (no additional energy consumption or electrical installation)
• RS485 interface for remote data transmission
• No absorbent material (compliance with agri-food standards).